Freeside Atlanta - User contributions [en]

Bambu A1

2025-12-12T02:50:41Z

Griffin: Created page for A1

__NOTOC__
[[File:platypus_small.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Freeside

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* TBD

= About =
This is a Bambu Lab A1. It has a 256mm x 256mm x 256mm print volume.

= Basic Instructions =
* TBD

== Basic Operational Knowledge ==
* How to slice and send to the printer:
(TODO: link good tutorial on slicing)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
TBD

== Advanced Operational Knowledge ==
None so far

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* None

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==

Anycubic Cure Station

2023-04-11T16:43:48Z

Griffin: Created page with "__NOTOC__ 300px = Zone = 01: 3D Printing = Owner(s) = * Freeside == Permissions == For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it. == Restrictions == * Use with 1.75mm PLA only. * Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make p..."

__NOTOC__
[[File:LD002R.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Freeside

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

Creality LD-002R

2023-04-11T16:43:26Z

3D Printing Server

2023-04-11T16:42:57Z

Griffin: Created page with "__NOTOC__ 300px = Zone = 01: 3D Printing = Owner(s) = * Nate == Permissions == For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it. == Restrictions == * Use with 1.75mm PLA only. * Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, mak..."

__NOTOC__
[[File:3DPrintServer.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Nate

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

File:GreenLathe.jpg

2023-04-11T16:42:13Z

Griffin:

File:PowermaticJointer.jpg

2023-04-11T16:41:15Z

Griffin:

File:LD002R.jpg

2023-04-11T16:39:20Z

Griffin:

TAZ 6

2023-04-11T16:38:55Z

__NOTOC__
[[File:TAZ6.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Nate

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

TAZ 5

2023-04-11T16:38:42Z

__NOTOC__
[[File:TAZ5.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Nate

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

File:3DPOctoprint.jpg

2023-04-11T16:38:13Z

Griffin:

File:3DPrintServer.jpg

2023-04-11T16:37:51Z

Griffin:

File:TAZ6.jpg

2023-04-11T16:37:28Z

Griffin:

File:TAZ5.jpg

2023-04-11T16:37:13Z

Griffin:

Chungus

2023-04-11T16:36:11Z

__NOTOC__
[[File:Chungus.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Nate

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

File:Chungus.jpg

2023-04-11T16:35:50Z

Griffin:

Prusa MMU

2023-04-11T16:35:13Z

__NOTOC__
[[File:PrusaMMU.jpg|thumb|right|300px]]

= Zone =
01: [[3D Printing]]

= Owner(s) =
* Freeside

== Permissions ==
For general use by members. Maintenance beyond changing filament is not allowed except if given explicit permission. Treat equipment as if it were your own and put away as or better than you found it.

== Restrictions ==
* Use with 1.75mm PLA only.
* Use the default Ender 3 PLA Cura profile to print on this machine (TODO: provide profile file, make profiles for other slicers)

= About =
This is a Creality Ender 3 Pro. It has a 220mm x 220mm x 250mm print volume.
This machine is set aside to print PLA specifically.

= Basic Instructions =
* Remove the Micro SD card from the printer. Use this SD card and this SD card only. Do not use your own or swap them between machines.
* On any computer you are allowed access to, slice your file and drag it onto the SD card for this printer.
* Reinsert the SD card into the machine. If the machine does not recognize it, click the menu option stating "Init TF Card" or similar.
* Navigate to your file under the "Files" menu and begin print

== Basic Operational Knowledge ==
* How to home:
Under the "Control" menu, home one or all axes
* How to slice and send to the printer:
See above or this link (TODO: link good tutorial on slicing for COTS Marlin machines)
* How to abort a failed job
Click the wheel and select the "Pause print" or "Cancel print" option, the former only stopping until the user resumes. The latter completely stops a print.
* How to properly remove a print once it has been completed
Remove the flexible bed and wait for it to cool. If the print is not yours, set the bed aside and do not remove the print. Replace the print bed with another. (TODO: get more beds)

* How to load and unload filament
Under the "Control" menu, select "Preheat PLA", and if prompted, select "Hotend only"
When at temperature, go to the "Prepare" menu, select "Move axis", and select "Extruder"
Retract the filament a few centimeters. Push the lever on the extruder and pull the filament from the bowden tube out.
Pull off the spool and replace it with a new one
Use the lever again to push the new filament into the hotend
Wait a few seconds and use similar steps as above to begin extruding some filament
If all looks good, disable the hotend using the interface
If something went wrong, contact someone who may be able to help

== Advanced Operational Knowledge ==
None so far

== Cura Preconfigured Profiles ==
(TODO: Upload Cura print profile(s))
* PLAtypus Standard - Uses 0.2mm layer heights and a small brim to prevent warping. This is a good all around profile.

== Other Preconfigured Profiles ==
(TODO: Slic3r profile)
(TODO: Simplify 3D profile)
(TODO: PrusaSlicer profile)

== Specifications and Detailed Instructions ==
TODO: complete specifications, links to documentation, etc.

= Warnings =
* This machine can only use PLA. Do not use PETG *EVER*. Do not print higher temp materials on PLAtypus, use the [[High Temp Printer]] for that.
* Please resist the urge to level this printer. The level should hold for quite a few prints. Leveling is permitted but should not be commonplace.

== Safety ==
* General 3D printer safety applies.

== Proposed Improvements - Anybody is welcome to offer help with these! ==
* A BLTouch is set aside for PLAtypus but has yet to be installed

File:PrusaMMU.jpg

2023-04-11T16:34:53Z

Griffin:

Grizzly Finger Brake

2023-04-11T03:07:29Z

Griffin: Created page with "300px = Zone = Equipment \ Warehouse \ Metal Shop = About = TODO = Owner(s) = * Freeside = Hackability = Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission. == Permissions == For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the mac..."

[[File:GrizzleFingerBrake.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:GrizzleFingerBrake.jpg

2023-04-11T03:07:01Z

Griffin:

Central Machinery Brake-Roller-Shear

2023-04-11T03:06:09Z

[[File:CentralMachinery3in1.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:CentralMachinery3in1.jpg

2023-04-11T03:05:52Z

Griffin:

PrimeWeld TIG 225X

2023-04-11T03:04:06Z

Griffin: Created page with "300px = Zone = Equipment \ Warehouse \ Metal Shop = About = TODO = Owner(s) = * Griffin Brown = Hackability = Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission. == Permissions == For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine a..."

[[File:Tig225X.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Griffin Brown

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:Tig225X.jpg

2023-04-11T03:03:52Z

Griffin:

AHP AlphaTIG 200x

2023-04-11T03:03:10Z

[[File:AlphaTIG.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:AlphaTIG.jpg

2023-04-11T03:00:52Z

Griffin:

Millermatic 185 MIG

2023-04-11T03:00:17Z

[[File:Millermatic185.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:Millermatic185.jpg

2023-04-11T02:59:38Z

Griffin:

Titanium Flux Core

2023-04-11T02:58:30Z

[[File:TitaniumFluxCore.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:TitaniumFluxCore.jpg

2023-04-11T02:58:12Z

Griffin:

Lincoln Electric Flux Core

2023-04-11T02:41:17Z

[[File:LincolnFluxCore.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:LincolnFluxCore.jpg

2023-04-11T02:41:01Z

Griffin:

Surface Grinder

2023-04-11T02:40:15Z

Griffin: Created page with "300px = Zone = Equipment \ Warehouse \ Metal Shop = About = TODO = Owner(s) = * Miles Neretin = Hackability = Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission. == Permissions == For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the ma..."

[[File:SurfaceGrinder.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Miles Neretin

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:SurfaceGrinder.jpg

2023-04-11T02:39:59Z

Griffin:

Bridgeport

2023-04-11T02:36:57Z

[[File:Bridgeport.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:Bridgeport.jpg

2023-04-11T02:35:09Z

Griffin:

Lotos Plasma Cutter

2023-04-11T02:34:42Z

[[File:LotusPlasmaCutter.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:LotusPlasmaCutter.jpg

2023-04-11T02:33:40Z

Griffin:

Langmuir Crossfire

2023-04-11T02:33:16Z

[[File:LangmuirCrossfire.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Griffin Brown

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:LangmuirCrossfire.jpg

2023-04-11T02:32:47Z

Griffin:

Rigid Abrasive Chop Saw

2023-04-11T02:32:11Z

[[File:RigidChopSaw.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:RigidChopSaw.jpg

2023-04-11T02:31:35Z

Griffin:

File:Evolution714ColdCut.jpg

2023-04-11T02:30:47Z

Griffin:

Portaband Stand

2023-04-11T02:29:08Z

[[File:PortabandStand.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:PortabandStand.jpg

2023-04-11T02:28:32Z

Griffin:

Horizontal Band Saw

2023-04-11T02:27:44Z

[[File:HorizontalBandSaw.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:HorizontalBandSaw.jpg

2023-04-11T02:27:22Z

Griffin:

In House CNC Mill

2023-04-11T02:26:23Z

Griffin: Created page

[[File:CncMillInProgress.jpg|thumb|300px]]

= Zone =
[[Equipment]] \ [[Warehouse]] \ [[Metal Shop]]

= About =
TODO

= Owner(s) =
* Freeside

= Hackability =
Do Not Hack. Alert BoD or president if the saw is damaged or in a dangerous state. Repairs and modification require permission.

== Permissions ==
For general use by members after they have completed an appropriate training course. Treat this equipment as if it were your own cleaning items off of the top of the machine and around its table after usage.

== Restrictions ==
TODO

== Caution ==
TODO

= Basic Instructions =
TODO

== Specifications and Detailed Instructions ==
TODO

= Tips =
TODO

= Maintenance History =
TODO

= Warnings =
TODO

[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts

[[File:Cutting.PNG|100px]] Cutting Risk

== Safety ==

[[File:Goggles.PNG|100px]] Eye Protection Required

[[File:Hearing.PNG|100px]] Hearing Protection Required

[[File:RTFM.PNG|100px]] Read the Fine Manual

[[category: Equipment]]

File:CncMillInProgress.jpg

2023-04-11T02:23:45Z

Griffin:

Equipment

2023-04-11T02:18:29Z

Griffin: Updated listings to reflect current tools

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Pterodactyl
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]

== [[Auditorium]] ==
* The [[WALL-O-WHITEBOARD]]
* Plenty of couches and chairs
* 80" TV
* Occulus VR headset
* PS4
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Platform for presentation area
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[920DW Scanner]]
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

FDM Printing

* [[PLAtypus | PLAtypus]]
* [[PETGiraffe | PETGiraffe]]
* [[Chucko | Chucko]]
* [[Prusa | Prusa]]
* [[Chungus | Chungus]]
* [[TAZ 5 | TAZ 5]]
* [[TAZ 6 | TAZ 6]]
* [[3D Pen | 3D Pen]]

Resin Printing

* [[Creality LD-002R | Creality LD-002R]]
* [[Anycubic Photon | Anycubic Photon]]
* [[Anycubic Cure Station | Anycubic Cure Station]]

Infrastructure

* [[3D Printing Server | 3D Printing Server]]
* [[3D Printing PC | 3D Printing PC]]

Not 3D Printing But Lives Here
* [[In House Laser Cutter]]
* [[K40 laser Cutter]]

== [[Kitchenette]] ==
* [[Rapid Ramen Cooker]]
* Sink
* Hotplate
* Fridge
* Brita Filter
* Microwave
* Electric Kettle

== [[ Arts and Crafts ]] ==
* Table top easels
* Various knitting needles and crochet hooks
* Painting equipment including canvas, brushes, and paints
* Beading paraphernalia, including a beading loom, findings, and beads of various sizes.
* Lanyard-making materials
* [[Fabric and Notions]]

== [[ Textiles ]] ==
* [[ Sewing Machines ]]
** [[Quilty As Charged: Kenmore Model 158]]
** [[That Stitch: Kenmore Model 385]]
** [[Hemsworth: Brother Model LS-590]]
** [[Sewphia: Singer Model 9124]]
** [[Sewjourner: Singer Model 4423]]
*[[Other Tools]]
**Irons
**Snap Setter
*[[ Silhouette Cameo Pro ]]
**Various Blades and materials

== [[Media_Lab| Media Lab]] ==
* [[ Workstations ]]
** [[Junkworks | Junkworks]]
** [[The Other One | The Other One]]
* [[ Server Rack ]]
** [[In House NAS | In House NAS]]

== [[Electronics_Lab| Electronics Lab]] ==
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno (a jillion of them)
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope

== [[Printers| Printers]] ==
*[[HP Designjet Z3100 Photo]]
* [[Dye Sublimation Printer]]
*Brother desktop printer in 3D print room

== [[Facility Tech Infrastructure]] ==
* Comcast Modem
* Visionis access controller
* Switches
* [[Juniper_J2320| Juniper J2320]]
* Orbii Mesh Access Points

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The old [[Woodshop]] as seen from the old facility's loft]]

* [[Grizzly Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* [[Black and Decker Compound Miter Saw]]
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* [[Techno_LC_4896 | Techno LC 4896]]
* Grinders and Cut-off Wheels
* Belt Sanders
* Power Drills and Hammer Drills
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* So many clamps
* Screwdrivers, pliers, and such

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Cutting]]
** [[Horizontal Band Saw]]
** [[PortaBand Stand]]
** [[Evolution Cold Cut Saw]]
** [[Rigid Abrasive Chop Saw]]
** [[Langmuir_Crossfire| Plasma Table]]
** [[Lotus Plasma Cutter]]

* [[Machining]]
** [[Bridgeport]]
** [[Busy Bee Lathe]]
** [[Surface Grinder]]
** [[In House CNC Mill]]

* [[Welding]]
** [[Lincoln Electric Flux Core]]
** [[Titanium Flux Core]]
** [[Lincoln Tombstone Buzzbox]]
** [[Miller MIG Machine]]
** [[AHP AlphaTIG]]
** [[PrimeWeld TIG 225X]]

* [[Forming]]
** [[Sheet Metal Brake]]
** [[Harbor Freight Roller/Shear/Finger Brake]]
** [[Grizzly Finger Brake]]

== [[Garage]] ==

* [[Engine Hoist]]
* Automotive-Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Ceramics]] ==

== [[Hot Shop]] ==

== [[Safety]] ==

* Fire extinguishers
* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* First Aid kits

Equipment

2023-04-11T01:57:29Z

Griffin: Reordered to align with front to back order in the space, not necessarily an accurate list of equipment

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Pterodactyl
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]

== [[Auditorium]] ==
* The [[WALL-O-WHITEBOARD]]
* Plenty of couches and chairs
* 80" TV
* Occulus VR headset
* PS4
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Platform for presentation area
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[920DW Scanner]]
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

FDM Printing

* [[PLAtypus | PLAtypus]]
* [[PETGiraffe | PETGiraffe]]
* [[Chucko | Chucko]]
* [[Prusa | Prusa]]
* [[Chungus | Chungus]]
* [[TAZ 5 | TAZ 5]]
* [[TAZ 6 | TAZ 6]]
* [[3D Pen | 3D Pen]]

Resin Printing

* [[Creality LD-002R | Creality LD-002R]]
* [[Anycubic Photon | Anycubic Photon]]
* [[Anycubic Cure Station | Anycubic Cure Station]]

Infrastructure

* [[3D Printing Server | 3D Printing Server]]
* [[3D Printing PC | 3D Printing PC]]

Not 3D Printing But Lives Here
* [[In House Laser Cutter]]
* [[K40 laser Cutter]]

== [[Kitchenette]] ==
* [[Rapid Ramen Cooker]]
* Sink
* Hotplate
* Fridge
* Brita Filter
* Microwave
* Electric Kettle

== [[ Arts and Crafts ]] ==
* Table top easels
* Various knitting needles and crochet hooks
* Painting equipment including canvas, brushes, and paints
* Beading paraphernalia, including a beading loom, findings, and beads of various sizes.
* Lanyard-making materials
* [[Fabric and Notions]]

== [[ Textiles ]] ==
* [[ Sewing Machines ]]
** [[Quilty As Charged: Kenmore Model 158]]
** [[That Stitch: Kenmore Model 385]]
** [[Hemsworth: Brother Model LS-590]]
** [[Sewphia: Singer Model 9124]]
** [[Sewjourner: Singer Model 4423]]
*[[Other Tools]]
**Irons
**Snap Setter
*[[ Silhouette Cameo Pro ]]
**Various Blades and materials

== [[Media_Lab| Media Lab]] ==
* [[ Workstations ]]
** [[Junkworks | Junkworks]]
** [[The Other One | The Other One]]
* [[ Server Rack ]]
** [[In House NAS | In House NAS]]

== [[Electronics_Lab| Electronics Lab]] ==
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno (a jillion of them)
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope

== [[Printers| Printers]] ==
*[[HP Designjet Z3100 Photo]]
* [[Dye Sublimation Printer]]
*Brother desktop printer in 3D print room

== [[Facility Tech Infrastructure]] ==
* Comcast Modem
* Visionis access controller
* Switches
* [[Juniper_J2320| Juniper J2320]]
* Orbii Mesh Access Points

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The old [[Woodshop]] as seen from the old facility's loft]]

* [[Grizzly Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* [[Black and Decker Compound Miter Saw]]
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* [[Techno_LC_4896 | Techno LC 4896]]
* Grinders and Cut-off Wheels
* Belt Sanders
* Power Drills and Hammer Drills
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* So many clamps
* Screwdrivers, pliers, and such

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]
* [[Honing Machine]]
* [[In House CNC Mill]]
* [[Langmuir_Crossfire| Plasma Table]]

== [[Garage]] ==

* [[Engine Hoist]]
* Automotive-Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Ceramics]] ==

== [[Hot Shop]] ==

== [[Safety]] ==

* Fire extinguishers
* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* First Aid kits