Freeside Atlanta - User contributions [en]

Dye Sublimation Printer

2019-10-28T20:26:04Z

Scott:

Artisan 1430 using INKXPRO Dye Sub Ink
Owner: Scott McGraw

Loanation Terms:
*Available for public use. No Training Required
*Removal from Freeside to be preceded by min 2 week notice
*Damage not covered by Freeside
*Materials not covered by Freeside

Usage:
Don't break it please.
Print using Sawgrass PowerDriver 1430. Need to register to download. Just give them fake info, and a fake serial number.

Since their Registration has gone down due to no support please find here some replacement dlls, and the installer:

https://drive.google.com/file/d/1ID9Yj-_HYtwk4QjXbEUZR0F_1U825Lzu/view?usp=sharing

Usage for Coated Aluminum:
Print onto Dye Sub Transfer Paper

Heat Press 400 degrees for 60 seconds.
*Rubber Mat on bottom, paper on mat, aluminum in middle, Teflon on top.
*Heat Through Aluminum
*Teflon prevents errant fumes from contaminating heat press

!Don't breath in the fumes!

Recommend printing oversize, and cutting aluminum to size with bandsaw beforehand. Otherwise some sublimation ink will contaminate the rest of the aluminum.

Sand edges after cutting. Affix using Kapton Tape to prevent sliding. Let cool before removal of paper to prevent ghost images from sliding.

Note: CIS system needs to be slightly elevated. Too Low, and ink drains from cartridges. Too high and ink is pushed through printer nozzles.

Reset ink levels by pressing ink change button, then pressing reset button on cartridges for 3 seconds.

Test print should be done ~ monthly to avoid drying ink in nozzles. This is true of any ink printer though.

Dye Sublimation Printer

2019-10-28T20:24:21Z

Scott:

Artisan 1430 using INKXPRO Dye Sub Ink
Owner: Scott McGraw

Loanation Terms:
*Available for public use. No Training Required
*Removal from Freeside to be preceded by min 2 week notice
*Damage not covered by Freeside
*Materials not covered by Freeside

Usage:
Don't break it please.
Print using Sawgrass PowerDriver 1430. Need to register to download. Just give them fake info, and a fake serial number.

Since their Registration has gone down due to no support please find here some replacement dlls, and the installer:
https://drive.google.com/file/d/1ID9Yj-_HYtwk4QjXbEUZR0F_1U825Lzu/view?usp=sharing

Usage for Coated Aluminum:
Print onto Dye Sub Transfer Paper

Heat Press 400 degrees for 60 seconds.
*Rubber Mat on bottom, paper on mat, aluminum in middle, Teflon on top.
*Heat Through Aluminum
*Teflon prevents errant fumes from contaminating heat press

!Don't breath in the fumes!

Recommend printing oversize, and cutting aluminum to size with bandsaw beforehand. Otherwise some sublimation ink will contaminate the rest of the aluminum.

Sand edges after cutting. Affix using Kapton Tape to prevent sliding. Let cool before removal of paper to prevent ghost images from sliding.

Note: CIS system needs to be slightly elevated. Too Low, and ink drains from cartridges. Too high and ink is pushed through printer nozzles.

Reset ink levels by pressing ink change button, then pressing reset button on cartridges for 3 seconds.

Test print should be done ~ monthly to avoid drying ink in nozzles. This is true of any ink printer though.

File:N2G4000.pdf

2019-08-24T16:32:42Z

Scott: Scott uploaded a new version of "File:N2G4000.pdf": Reverted to version as of 17:51, 19 January 2017

User Manual for A4U4000 Vending Machine

Policy MemberStorage

2019-06-08T19:44:38Z

Scott:

'''Approved: 2013-JUL-13'''<br />

'''Edited: 1/19/2016 to reflect updated storage size'''

In general, Freeside does not provide long-term storage solutions for its members’ equipment and projects. However, exceptions can be made for equipment, tools, consumables, and raw materials that add value to the space and other members.

As part of any membership, members are granted storage space with dimensions of approximately 23x16x12in (Room for one standard 12 gallon tote). Members are responsible for providing their own storage bins, and securing their belongings in them. No loose storage will be permitted. Freeside members are expected to respect other members’ property in member storage.

Restricted materials are not allowed to be stored in member storage. The list of these materials is maintained by the SR team.

If a member stores equipment, tools, consumables, or raw materials in excess of their member storage or SR-approved storage, then Freeside will send the member a notification to remove anything in excess storage, subject to the terms of the notification.

When membership is terminated, the former member is notified to remove their property, subject to the terms of the notification(s). Notifications are given upon termination, and then 2 weeks after the first notice, a second notice is given.

If a member notified in this manner does not remove their property subject to the terms of the notification, then the property is considered forfeit and may be removed, sold, or absorbed by Freeside (after a minimum of 30 days).

Canon PowerShot

2019-01-10T03:33:54Z

Scott:

Camera and Charger for taking photos.

Owner: Scott M. Standard loanation.

Model 530HS
Has features:
* Wi-Fi: How does that work.
* HDMI OUt
* Uses Micro SD

3040 CNC Router

2017-12-28T14:40:34Z

Scott: Replaced content with "300px To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing."

[[File:ImageOfEquipment.jpg|thumb|300px]]
To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing.

CNC Cart

2017-12-28T14:38:55Z

Scott: Replaced content with "300px To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing."

[[File:ImageOfEquipment.jpg|thumb|300px]]
To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing.

920DW Scanner

2017-12-18T01:20:15Z

Scott: Created page with "Artisan 1430 using INKXPRO Dye Sub Ink Owner: Scott McGraw Loanation Terms: Available for public use. No Training Required Removal from Freeside to be preceded by min 2 week..."

Artisan 1430 using INKXPRO Dye Sub Ink Owner: Scott McGraw

Loanation Terms:

Available for public use. No Training Required
Removal from Freeside to be preceded by min 2 week notice
Damage not covered by Freeside
Materials not covered by Freeside

Usage: Don't break it please.

Equipment

2017-12-18T01:19:01Z

Scott: /* Auditorium */

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Lockpick kit (needs improvement)
* Rhombic hexecontahedron
* Pterodactyl
* Weather station
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]
* [[Equipment/Cisco_7960 | Cisco 7960]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

* The Wall of Spool
* [[Lulzbot_Mini | Lulzbot Mini]]
* [[LulzBot AO-100]]
* Thingomatic
* Cupcake 1
* Cupcake 2
* Rep Rap
* [[The Kraken]] (custom build)
* Member workstation

== [[Electronics_Lab| Electronics Lab]] ==

* Death-Bot, Freeside's [[Hexacopter]]
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope
* (Temporary) [[List of Donated Equipment]]
* [[Electronic Coil Winder]]

== [[Classroom]] ==

* Desk space for 16
* [[Portable projector]]
* Whiteboard (both on the wall and on the tables!)
* Official-looking teacher's desk
* [[Mettler PE 3600 Electronic Scale]]
* [[Printers / Scanners]]

== [[Server_Room| Server Room]] ==
* Racks
* Comcast Modem
* [[Juniper_J2320| Juniper J2320]]
* Rack servers running *nix OS, various specifications
* IT workstation
* [[Kill-A-Watt]]
* [[Security Bit Set]]

== [[Auditorium]] ==
* A bunch of couches and chairs
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Totally legit podium with a microphone
* Stage for presentation area
* Beautiful, well-designed media cabinet
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[Pinball Machine]]
* [[Dye Sublimation Printer]]
* [[920DW Scanner]]

== [[Media_Lab| Media Lab]] ==
* Media workstations (Windows and Linux)
* Network attached storage (NAS) systems
* Emotiv Epoc brain-computer interface headset
* Vuzix stereoscopic glasses
* Kinect with SDK
* Eye tracking system with Open Gazer and OGAMA
* Arduino
* Raspberry Pi
* [[Yamaha guitar]] (now playable, available for further hacking)
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]
* Avid Vocal Studio mic kit
* USB-to-DMX interface
* Dreamlights RGB LED lighting
* 5.1 Surround sound system (it's more like a 9.4 system - Alan)
* [[Canon PowerShot]]

== [[Bio_Lab| Bio Lab]] ==
* Stereoscopic microscope
* Glassware
* Slides
* Hot plate with stirrer
* Scales
* Incubator

== [[Ham Shack| Ham Shack]] / Misc Room ==
* Multi-Operator Radio Station Desk
* Patch Panel for coax and other cables
* Multiple power supplies and battery backup power
* SWR and Transmit Power Meters
* Amateur Band Plan, Maidenhead Grid Maps, and other information charts
* PC for SDR, station logging, and digital modes
* Locker for radios
* [[Radio Rack]]
:* Kenwood UHF Transceiver (70cm band)
:* Kenwood VHF Transceiver (2M band)
:* Cobra CB (Possible conversion to 10M band?)

=== Misc ===
* [[Embroidery Machine]]

== [[Tool_Room| Tool Room]] ==

[[File:32_-_8QM4x4h.jpg|thumb|right|300px]]

* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* More than 30 clamps
* Screwdrivers, pliers, and such
* [[TEKTON Tool Kits]]

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The [[Woodshop]] as seen from the loft]]

* [[Delta 36-430 Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* Grinders and Cut-off Wheels
* Belt Sander
* [[Black and Decker Compound Miter Saw]]
* Power Drills and Hammer Drills
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* [[Cisco7960G_02]]

== [[CNC Lab]] ==
* [[Laser Cutter]]
* Shapoko CNC Router
* [[CNC Cart]]
* [[3040 CNC Router]]
* [[Paint Spray Booth]]
* [[Vacuum Former]]

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]

== [[Garage]] ==

* Engine Stand
* [[Tire Changer]]
* [[Engine Hoist]]
* Automotive Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Safety]] ==

* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* Eye wash
* Two First Aid kits

== [[Attic]] ==
* Build-out Materials

== [[Kitchen]] ==
* [[Rapid Ramen Cooker]]

File:Freeside FloorPlan(Website).pdf

2017-06-25T22:47:31Z

Scott:

User:Scott

2017-04-17T02:17:46Z

Scott:

Scott is a magical jedi wizard with laser cutter superpowers, and a long-time member of Freeside with 75th-level knowledge of freeside tools.

Dye Sublimation Printer

2017-01-12T11:52:17Z

Scott:

Artisan 1430 using INKXPRO Dye Sub Ink
Owner: Scott McGraw

Loanation Terms:
*Available for public use. No Training Required
*Removal from Freeside to be preceded by min 2 week notice
*Damage not covered by Freeside
*Materials not covered by Freeside

Usage:
Don't break it please.
Print using Sawgrass PowerDriver 1430. Need to register to download. Just give them fake info, and a fake serial number.

Usage for Coated Aluminum:
Print onto Dye Sub Transfer Paper

Heat Press 400 degrees for 60 seconds.
*Rubber Mat on bottom, paper on mat, aluminum in middle, Teflon on top.
*Heat Through Aluminum
*Teflon prevents errant fumes from contaminating heat press

!Don't breath in the fumes!

Recommend printing oversize, and cutting aluminum to size with bandsaw beforehand. Otherwise some sublimation ink will contaminate the rest of the aluminum.

Sand edges after cutting. Affix using Kapton Tape to prevent sliding. Let cool before removal of paper to prevent ghost images from sliding.

Note: CIS system needs to be slightly elevated. Too Low, and ink drains from cartridges. Too high and ink is pushed through printer nozzles.

Reset ink levels by pressing ink change button, then pressing reset button on cartridges for 3 seconds.

Test print should be done ~ monthly to avoid drying ink in nozzles. This is true of any ink printer though.

Dye Sublimation Printer

2017-01-12T11:50:36Z

Scott:

Artisan 1430 using INKXPRO Dye Sub Ink
Owner: Scott McGraw

Loanation Terms:
*Available for public use. No Training Required
*Removal from Freeside to be preceded by min 2 week notice
*Damage not covered by Freeside
*Materials not covered by Freeside

Usage:
Don't break it please.
Print using Sawgrass PowerDriver 1430. Need to register to download. Just give them fake info, and a fake serial number.

Usage for Coated Aluminum:
Print onto Dye Sub Transfer Paper

Heat Press 400 degrees for 60 seconds.
*Rubber Mat on bottom, paper on mat, aluminum in middle, Teflon on top.
*Heat Through Aluminum
*Teflon prevents errant fumes from contaminating heat press

!Don't breath in the fumes!

Recommend printing oversize, and cutting aluminum to size with bandsaw beforehand. Sand edges after cutting. Affix using Kapton Tape to prevent sliding. Let cool before removal of paper to prevent ghost images from sliding.

Otherwise some sublimation ink will contaminate the rest of the aluminum.

Note: CIS system needs to be slightly elevated. Too Low, and ink drains from cartridges. Too high and ink is pushed through printer nozzles.

Reset ink levels by pressing ink change button, then pressing reset button on cartridges for 3 seconds.

Dye Sublimation Printer

2017-01-12T11:36:45Z

Scott: Created page with "Artisan 1430 using INKXPRO Dye Sub Ink Owner: Scott McGraw Loanation Terms: *Available for public use. No Training Required *Materials to be paid for by users, not Freeside...."

Artisan 1430 using INKXPRO Dye Sub Ink
Owner: Scott McGraw

Loanation Terms:
*Available for public use. No Training Required
*Materials to be paid for by users, not Freeside.
*Removal from Freeside to be preceded by min 2 week notice

Usage:
Don't break it please.
Print using Sawgrass PowerDriver 1430. Need to register to download. Just give them fake info, and a fake serial number.

Usage for Coated Aluminum:
Print onto Dye Sub Transfer Paper

Heat Press 400 degrees for 60 seconds.
*Rubber Mat on bottom, paper on mat, aluminum in middle, Teflon on top.
*Heat Through Aluminum
*Teflon prevents errant fumes from contaminating heat press

!Don't breath in the fumes!

Recommend printing oversize, and cutting aluminum to size with bandsaw beforehand. Sand edges after cutting. Otherwise some sublimation ink will contaminate the rest of the aluminum.

Note: CIS system needs to be slightly elevated. Too Low, and ink drains from cartridges. Too high and ink is pushed through printer nozzles.

Reset ink levels by pressing ink change button, then pressing reset button on cartridges for 3 seconds.

Equipment

2017-01-12T11:27:05Z

Scott: /* Auditorium */

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Lockpick kit (needs improvement)
* Rhombic hexecontahedron
* Pterodactyl
* Weather station
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]
* [[Equipment/Cisco_7960 | Cisco 7960]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

* The Wall of Spool
* [[Lulzbot_Mini | Lulzbot Mini]]
* [[LulzBot AO-100]]
* Thingomatic
* Cupcake 1
* Cupcake 2
* Rep Rap
* [[The Kraken]] (custom build)
* Member workstation

== [[Electronics_Lab| Electronics Lab]] ==

* Death-Bot, Freeside's [[Hexacopter]]
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope
* (Temporary) [[List of Donated Equipment]]
* [[Electronic Coil Winder]]

== [[Classroom]] ==

* Desk space for 16
* [[Portable projector]]
* Whiteboard (both on the wall and on the tables!)
* Official-looking teacher's desk
* [[Mettler PE 3600 Electronic Scale]]
* [[Printers / Scanners]]

== [[Server_Room| Server Room]] ==
* Racks
* Comcast Modem
* [[Juniper_J2320| Juniper J2320]]
* Rack servers running *nix OS, various specifications
* IT workstation
* [[Kill-A-Watt]]
* [[Security Bit Set]]

== [[Auditorium]] ==
* A bunch of couches and chairs
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Totally legit podium with a microphone
* Stage for presentation area
* Beautiful, well-designed media cabinet
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[Pinball Machine]]
* [[Dye Sublimation Printer]]

== [[Media_Lab| Media Lab]] ==
* Media workstations (Windows and Linux)
* Network attached storage (NAS) systems
* Emotiv Epoc brain-computer interface headset
* Vuzix stereoscopic glasses
* Kinect with SDK
* Eye tracking system with Open Gazer and OGAMA
* Arduino
* Raspberry Pi
* [[Yamaha guitar]] (now playable, available for further hacking)
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]
* Avid Vocal Studio mic kit
* USB-to-DMX interface
* Dreamlights RGB LED lighting
* 5.1 Surround sound system (it's more like a 9.4 system - Alan)
* [[Canon PowerShot]]

== [[Bio_Lab| Bio Lab]] ==
* Stereoscopic microscope
* Glassware
* Slides
* Hot plate with stirrer
* Scales
* Incubator

== [[Ham Shack| Ham Shack]] / Misc Room ==
* Multi-Operator Radio Station Desk
* Patch Panel for coax and other cables
* Multiple power supplies and battery backup power
* SWR and Transmit Power Meters
* Amateur Band Plan, Maidenhead Grid Maps, and other information charts
* PC for SDR, station logging, and digital modes
* Locker for radios
* [[Radio Rack]]
:* Kenwood UHF Transceiver (70cm band)
:* Kenwood VHF Transceiver (2M band)
:* Cobra CB (Possible conversion to 10M band?)

=== Misc ===
* [[Embroidery Machine]]

== [[Tool_Room| Tool Room]] ==

[[File:32_-_8QM4x4h.jpg|thumb|right|300px]]

* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* More than 30 clamps
* Screwdrivers, pliers, and such
* [[TEKTON Tool Kits]]

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The [[Woodshop]] as seen from the loft]]

* [[Delta 36-430 Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* Grinders and Cut-off Wheels
* Belt Sander
* [[Black and Decker Compound Miter Saw]]
* Power Drills and Hammer Drills
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* [[Cisco7960G_02]]

== [[CNC Lab]] ==
* [[Laser Cutter]]
* Shapoko CNC Router
* [[CNC Cart]]
* [[3040 CNC Router]]
* [[Paint Spray Booth]]
* [[Vacuum Former]]

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]

== [[Garage]] ==

* Engine Stand
* [[Tire Changer]]
* [[Engine Hoist]]
* Automotive Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Safety]] ==

* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* Eye wash
* Two First Aid kits

== [[Attic]] ==
* Build-out Materials

== [[Kitchen]] ==
* [[Rapid Ramen Cooker]]

Canon PowerShot

2017-01-06T13:49:37Z

Scott: Created page with "Camera and Charger for taking photos. Model 530HS Has features: * Wi-Fi: How does that work. * HDMI OUt * Uses Micro SD"

Camera and Charger for taking photos.

Model 530HS
Has features:
* Wi-Fi: How does that work.
* HDMI OUt
* Uses Micro SD

Equipment

2017-01-06T13:48:45Z

Scott: /* Media Lab */

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Lockpick kit (needs improvement)
* Rhombic hexecontahedron
* Pterodactyl
* Weather station
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]
* [[Equipment/Cisco_7960 | Cisco 7960]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

* The Wall of Spool
* [[Lulzbot_Mini | Lulzbot Mini]]
* [[LulzBot AO-100]]
* Thingomatic
* Cupcake 1
* Cupcake 2
* Rep Rap
* [[The Kraken]] (custom build)
* Member workstation

== [[Electronics_Lab| Electronics Lab]] ==

* Death-Bot, Freeside's [[Hexacopter]]
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope
* (Temporary) [[List of Donated Equipment]]
* [[Electronic Coil Winder]]

== [[Classroom]] ==

* Desk space for 16
* [[Portable projector]]
* Whiteboard (both on the wall and on the tables!)
* Official-looking teacher's desk
* [[Mettler PE 3600 Electronic Scale]]
* [[Printers / Scanners]]

== [[Server_Room| Server Room]] ==
* Racks
* Comcast Modem
* [[Juniper_J2320| Juniper J2320]]
* Rack servers running *nix OS, various specifications
* IT workstation
* [[Kill-A-Watt]]
* [[Security Bit Set]]

== [[Auditorium]] ==
* A bunch of couches and chairs
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Totally legit podium with a microphone
* Stage for presentation area
* Beautiful, well-designed media cabinet
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[Pinball Machine]]

== [[Media_Lab| Media Lab]] ==
* Media workstations (Windows and Linux)
* Network attached storage (NAS) systems
* Emotiv Epoc brain-computer interface headset
* Vuzix stereoscopic glasses
* Kinect with SDK
* Eye tracking system with Open Gazer and OGAMA
* Arduino
* Raspberry Pi
* [[Yamaha guitar]] (now playable, available for further hacking)
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]
* Avid Vocal Studio mic kit
* USB-to-DMX interface
* Dreamlights RGB LED lighting
* 5.1 Surround sound system (it's more like a 9.4 system - Alan)
* [[Canon PowerShot]]

== [[Bio_Lab| Bio Lab]] ==
* Stereoscopic microscope
* Glassware
* Slides
* Hot plate with stirrer
* Scales
* Incubator

== [[Ham Shack| Ham Shack]] / Misc Room ==
* Multi-Operator Radio Station Desk
* Patch Panel for coax and other cables
* Multiple power supplies and battery backup power
* SWR and Transmit Power Meters
* Amateur Band Plan, Maidenhead Grid Maps, and other information charts
* PC for SDR, station logging, and digital modes
* Locker for radios
* [[Radio Rack]]
:* Kenwood UHF Transceiver (70cm band)
:* Kenwood VHF Transceiver (2M band)
:* Cobra CB (Possible conversion to 10M band?)

=== Misc ===
* [[Embroidery Machine]]

== [[Tool_Room| Tool Room]] ==

[[File:32_-_8QM4x4h.jpg|thumb|right|300px]]

* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* More than 30 clamps
* Screwdrivers, pliers, and such
* [[TEKTON Tool Kits]]

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The [[Woodshop]] as seen from the loft]]

* [[Delta 36-430 Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* Grinders and Cut-off Wheels
* Belt Sander
* [[Black and Decker Compound Miter Saw]]
* Power Drills and Hammer Drills
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* [[Cisco7960G_02]]

== [[CNC Lab]] ==
* [[Laser Cutter]]
* Shapoko CNC Router
* [[CNC Cart]]
* [[3040 CNC Router]]
* [[Paint Spray Booth]]
* [[Vacuum Former]]

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]

== [[Garage]] ==

* Engine Stand
* [[Tire Changer]]
* [[Engine Hoist]]
* Automotive Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Safety]] ==

* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* Eye wash
* Two First Aid kits

== [[Attic]] ==
* Build-out Materials

== [[Kitchen]] ==
* [[Rapid Ramen Cooker]]

Equipment

2017-01-06T13:47:42Z

Scott: /* Media Lab */

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Lockpick kit (needs improvement)
* Rhombic hexecontahedron
* Pterodactyl
* Weather station
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]
* [[Equipment/Cisco_7960 | Cisco 7960]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

* The Wall of Spool
* [[Lulzbot_Mini | Lulzbot Mini]]
* [[LulzBot AO-100]]
* Thingomatic
* Cupcake 1
* Cupcake 2
* Rep Rap
* [[The Kraken]] (custom build)
* Member workstation

== [[Electronics_Lab| Electronics Lab]] ==

* Death-Bot, Freeside's [[Hexacopter]]
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope
* (Temporary) [[List of Donated Equipment]]
* [[Electronic Coil Winder]]

== [[Classroom]] ==

* Desk space for 16
* [[Portable projector]]
* Whiteboard (both on the wall and on the tables!)
* Official-looking teacher's desk
* [[Mettler PE 3600 Electronic Scale]]
* [[Printers / Scanners]]

== [[Server_Room| Server Room]] ==
* Racks
* Comcast Modem
* [[Juniper_J2320| Juniper J2320]]
* Rack servers running *nix OS, various specifications
* IT workstation
* [[Kill-A-Watt]]
* [[Security Bit Set]]

== [[Auditorium]] ==
* A bunch of couches and chairs
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Totally legit podium with a microphone
* Stage for presentation area
* Beautiful, well-designed media cabinet
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[Pinball Machine]]

== [[Media_Lab| Media Lab]] ==
* Media workstations (Windows and Linux)
* Network attached storage (NAS) systems
* Emotiv Epoc brain-computer interface headset
* Vuzix stereoscopic glasses
* Kinect with SDK
* Eye tracking system with Open Gazer and OGAMA
* Arduino
* Raspberry Pi
* [[Yamaha guitar]] (now playable, available for further hacking)
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]
* Avid Vocal Studio mic kit
* USB-to-DMX interface
* Dreamlights RGB LED lighting
* 5.1 Surround sound system (it's more like a 9.4 system - Alan)
* [[Cannn PowerShot]]

== [[Bio_Lab| Bio Lab]] ==
* Stereoscopic microscope
* Glassware
* Slides
* Hot plate with stirrer
* Scales
* Incubator

== [[Ham Shack| Ham Shack]] / Misc Room ==
* Multi-Operator Radio Station Desk
* Patch Panel for coax and other cables
* Multiple power supplies and battery backup power
* SWR and Transmit Power Meters
* Amateur Band Plan, Maidenhead Grid Maps, and other information charts
* PC for SDR, station logging, and digital modes
* Locker for radios
* [[Radio Rack]]
:* Kenwood UHF Transceiver (70cm band)
:* Kenwood VHF Transceiver (2M band)
:* Cobra CB (Possible conversion to 10M band?)

=== Misc ===
* [[Embroidery Machine]]

== [[Tool_Room| Tool Room]] ==

[[File:32_-_8QM4x4h.jpg|thumb|right|300px]]

* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* More than 30 clamps
* Screwdrivers, pliers, and such
* [[TEKTON Tool Kits]]

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The [[Woodshop]] as seen from the loft]]

* [[Delta 36-430 Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* Grinders and Cut-off Wheels
* Belt Sander
* [[Black and Decker Compound Miter Saw]]
* Power Drills and Hammer Drills
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* [[Cisco7960G_02]]

== [[CNC Lab]] ==
* [[Laser Cutter]]
* Shapoko CNC Router
* [[CNC Cart]]
* [[3040 CNC Router]]
* [[Paint Spray Booth]]
* [[Vacuum Former]]

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]

== [[Garage]] ==

* Engine Stand
* [[Tire Changer]]
* [[Engine Hoist]]
* Automotive Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Safety]] ==

* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* Eye wash
* Two First Aid kits

== [[Attic]] ==
* Build-out Materials

== [[Kitchen]] ==
* [[Rapid Ramen Cooker]]

Cannon PowerShot

2017-01-06T13:46:37Z

Scott: Blanked the page

Cannon PowerShot

2017-01-06T13:45:29Z

Scott: Created page with "Camera and Charger for taking photos. Model 530HS Has features: * Wi-Fi: How does that work. * HDMI OUt * Uses Micro SD"

Camera and Charger for taking photos.

Model 530HS
Has features:
* Wi-Fi: How does that work.
* HDMI OUt
* Uses Micro SD

Equipment

2017-01-06T13:42:22Z

Scott:

Freeside has lots of equipment, spare parts, material, furniture, and almost anything you can think of.

We're always looking to expand, so we also have a [[Wishlist]] of equipment that we'd like to have. For things that are on loan to the space, we have a [[Loanation Agreement]].

== [[Welcome]] ==

* [[WelcomeKiosk| Welcome Kiosk]]
* Van de Graaf generator
* Lockpick kit (needs improvement)
* Rhombic hexecontahedron
* Pterodactyl
* Weather station
* [[WelcomeTablet| Asus TF-101 Tablet]]
* [[iPad Square Kiosk]]
* [[Equipment/Cisco_7960 | Cisco 7960]]

== [[3D_Printing| 3D Printing]] ==

[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

* The Wall of Spool
* [[Lulzbot_Mini | Lulzbot Mini]]
* [[LulzBot AO-100]]
* Thingomatic
* Cupcake 1
* Cupcake 2
* Rep Rap
* [[The Kraken]] (custom build)
* Member workstation

== [[Electronics_Lab| Electronics Lab]] ==

* Death-Bot, Freeside's [[Hexacopter]]
* Solder
* Flux pens
* Flux paste
* Soldering Irons
* Toaster Solder [[Reflow Oven]]
* Helping Hands with Magnifiers
* Copper wool in cups
* Arduino Uno
* TI MSP430
* Raspberry Pi
* Oscilloscopes
* Bench power supplies
* Multimeters
* Breadboards and test benches
* Desoldering tools
* Many, many spare parts and components
* [[Rigol DS1054Z]] DSO scope
* (Temporary) [[List of Donated Equipment]]
* [[Electronic Coil Winder]]

== [[Classroom]] ==

* Desk space for 16
* [[Portable projector]]
* Whiteboard (both on the wall and on the tables!)
* Official-looking teacher's desk
* [[Mettler PE 3600 Electronic Scale]]
* [[Printers / Scanners]]

== [[Server_Room| Server Room]] ==
* Racks
* Comcast Modem
* [[Juniper_J2320| Juniper J2320]]
* Rack servers running *nix OS, various specifications
* IT workstation
* [[Kill-A-Watt]]
* [[Security Bit Set]]

== [[Auditorium]] ==
* A bunch of couches and chairs
* 16ft x 9ft projection screen
* [[1080p 2500 lumen projector]]
* 5.2 Surround sound system
* Totally legit podium with a microphone
* Stage for presentation area
* Beautiful, well-designed media cabinet
* Weird videos from the internet
* [[HDMI Extender]]
* [[Moog Werkstatt-01]]
* [[Pinball Machine]]

== [[Media_Lab| Media Lab]] ==
* Media workstations (Windows and Linux)
* Network attached storage (NAS) systems
* Emotiv Epoc brain-computer interface headset
* Vuzix stereoscopic glasses
* Kinect with SDK
* Eye tracking system with Open Gazer and OGAMA
* Arduino
* Raspberry Pi
* [[Yamaha guitar]] (now playable, available for further hacking)
* [[Starcaster by Fender guitar]]
* [[Ben's custom guitar]]
* [[Peavey Rage 158 Guitar Amplifier]]
* Avid Vocal Studio mic kit
* USB-to-DMX interface
* Dreamlights RGB LED lighting
* 5.1 Surround sound system (it's more like a 9.4 system - Alan)
[[Cannon PowerShot]]

== [[Bio_Lab| Bio Lab]] ==
* Stereoscopic microscope
* Glassware
* Slides
* Hot plate with stirrer
* Scales
* Incubator

== [[Ham Shack| Ham Shack]] / Misc Room ==
* Multi-Operator Radio Station Desk
* Patch Panel for coax and other cables
* Multiple power supplies and battery backup power
* SWR and Transmit Power Meters
* Amateur Band Plan, Maidenhead Grid Maps, and other information charts
* PC for SDR, station logging, and digital modes
* Locker for radios
* [[Radio Rack]]
:* Kenwood UHF Transceiver (70cm band)
:* Kenwood VHF Transceiver (2M band)
:* Cobra CB (Possible conversion to 10M band?)

=== Misc ===
* [[Embroidery Machine]]

== [[Tool_Room| Tool Room]] ==

[[File:32_-_8QM4x4h.jpg|thumb|right|300px]]

* Jigsaws
* Circular Saws
* Grinders and Cut-off Wheels
* Power Drills and Hammer Drill
* Craftsman Router 315-17300
* Extension Cords
* Dremel Hand Tools
* Planers
* LOTS of almost-complete kits of drill bits
* More than 30 clamps
* Screwdrivers, pliers, and such
* [[TEKTON Tool Kits]]

== [[Woodshop]] ==

[[File:Workshop - from Loft.jpg|thumb|250px|The [[Woodshop]] as seen from the loft]]

* [[Delta 36-430 Table Saw]]
* [[Porter Cable 1HP Dust Collector]]
* [[Steel City Drill Press]]
* [[Ryobi 9" Band Saw BS903]]
* [[Laguna LT18 Band Saw]]
* Grinders and Cut-off Wheels
* Belt Sander
* [[Black and Decker Compound Miter Saw]]
* Power Drills and Hammer Drills
* [[Porter Cable Scroll Saw]]
* [[Delta Bench Grinder]]
* [[Central Machinery Jointer]]
* Craftsman Router 315-17300
* Squirrel Cage shop fan
* Propane Blowtorches
* Tons of Extension Cords
* [[Cisco7960G_02]]

== [[CNC Lab]] ==
* [[Laser Cutter]]
* Shapoko CNC Router
* [[CNC Cart]]
* [[3040 CNC Router]]
* [[Paint Spray Booth]]
* [[Vacuum Former]]

== [[Metal Shop]] ==

[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]

* [[Busy Bee Lathe]]
* [[Lincoln Electric Mig Welder]]
* Hobart Stickmate Welder
* Ridgid Air Compressor
* [[Kiln]]
* Crucible
* Grinders and cut-off wheels
* [[Sheet Metal Brake]]
* [[Gas Forge]]
* [[Anvil and Blacksmith Tools]]
* [[Black Bull Metal Band Saw]]

== [[Garage]] ==

* Engine Stand
* [[Tire Changer]]
* [[Engine Hoist]]
* Automotive Related Tools
* Floor Jack
* [[Shop Air Compressor]]

== [[Safety]] ==

* Safety glasses
* Ear plugs
* Heavy-duty hearing protection
* Dust masks and air filters
* A hard hat
* Eye wash
* Two First Aid kits

== [[Attic]] ==
* Build-out Materials

== [[Kitchen]] ==
* [[Rapid Ramen Cooker]]

Info

2016-10-21T21:57:56Z

Scott:

__NOTOC__
[[File:FrontSignCrop.jpg|thumb|right|300px]]
[[File:Dsc_1048_27728446822_o.jpg|thumb|right|300px]]
[[File:24495000883_c84da5a225_h.jpg|thumb|right|300px]]

'''Freeside Atlanta''' (est. 2009) is a 501(c)(3) non-profit work space built entirely by volunteers.

Located just south of downtown Atlanta, we are a community of makers, tinkerers, engineers, programmers, artists, teachers, and lunatics. As a community, we have built out our space with tools and equipment for electronics, 3D printing, woodworking, metalworking, art, design, classes, and events. Everything you see in [[Our Space|our space]] was donated or built by members.

Our members are engaged in amazing [[Projects|projects]] and love to share knowledge. We also develop and work with open source and free technology wherever possible, and try to release our creations under variants of the [https://creativecommons.org/licenses Creative Commons license].

You don't have to be a Freeside member to come to our events or take our classes. We encourage you to come out to the '''Tuesday night Open House''' that we have every second and fourth Tuesday at 7:30 PM, or to any of the other public classes or events that we have on [http://www.meetup.com/Freeside-Atlanta Meetup]. Come check the place out and see if this is a community that you'd be interested in [[Joining|joining]]!

== Our Mission ==

Freeside Technology Spaces, a 501(c)(3) non-profit organization, strives to provide a space that inspires collaboration, creativity, teaching, and open projects for the Atlanta community.

== Our Space ==

We built our space into different areas to consolidate where we work on stuff in the space. You can check out the different areas of our space [[Our_Space | here]]. We are located at:

675 Metropolitan Parkway<br>
Suite 6066<br>
Atlanta, GA 30310

There are [[Detailed Directions|detailed directions]] to our space to help you find the place.

== Freeside by the Numbers ==

* 50 [[Members|members]] and [[Joining|growing]]!
* 1,200+ makers served in 2012
* 6,000 square feet
* 22 [[Our_Space|zones]] of awesomeness
* 1 cat puzzle

== Past Projects ==

Interesting [[Projects | projects]] going on at our space:
* An under $2000 [http://blog.freesideatlanta.org/2013/03/super-cheap-and-effective-off-road.html Off Road Wheelchair] art project
* A [http://blog.freesideatlanta.org/2012/04/draft-freesiders-hackers-collaborate-in.html published white paper] for an open collaboration to 3D print CT scans for pre-surgery planning
* An interactive [https://wiki.freesideatlanta.org/fs/Infinity_Portal Infinity Mirror Archway] art project for Alchemy
* [http://www.learntosolder.org/ LearnToSolder.org] - started by a member for Atlanta's Mini Maker Faire (before we had a full Maker Faire)
* [https://wiki.freesideatlanta.org/fs/Gaze Gaze Tracking in Rookie and Veteran Surgeons] - Another medical collaboration examining how diagnosticians look at x-rays.
* [[Race_Car| Freeside's ChumpCar Race Car]] - Join the team and race to victory!
* The [[JAM]] (Joy's Art Machine): A machine that gifts art

== Upcoming Events ==

<shtml version="2" hash="077ef96cabd5093bdf6e83e2be757e3c43c5c8b21f7a0d4af15cc4da3b52d604"><iframe src="/static/meetup.html" frameborder=0>

</iframe></shtml><p>

== Freeside in Photos ==

<gallery widths=200px heights=200px>
File:IMG_20151206_084209.jpg
File:41_-_QgruavT.jpg
File:27655585626_8152e003b1_k.jpg
File:DSC_0537.jpg
File:Dsc_1061_27728443462_o.jpg
</gallery>

MediaWiki:Sidebar

2016-10-21T21:55:36Z

Scott: