Steel City Drill Press - Revision history

Griffin: Added photo

2023-04-11T01:27:20Z

Added photo

← Older revision		Revision as of 01:27, 11 April 2023
Line 1:		Line 1:
	[[File:~~ImageOfEquipment~~.jpg\|thumb\|300px]]		[[File:SteelCityDrillPress.jpg\|thumb\|300px]]
	A drill press (also known as a pedestal drill, pillar drill, or bench drill) is a fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base, column (or pillar), table, spindle (or quill), and drill head, usually driven by an induction motor. The head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis of the column. The table can be adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on the operator to lift and reclamp the table in position. The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular to the column. The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle to the closest edge of the pillar.		A drill press (also known as a pedestal drill, pillar drill, or bench drill) is a fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base, column (or pillar), table, spindle (or quill), and drill head, usually driven by an induction motor. The head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis of the column. The table can be adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on the operator to lift and reclamp the table in position. The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular to the column. The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle to the closest edge of the pillar.

Jud: /* Specifications and Detailed Instructions */

2016-07-30T00:18:49Z

Specifications and Detailed Instructions

← Older revision	Revision as of 00:18, 30 July 2016
(No difference)

Jud: /* Specifications and Detailed Instructions */

2016-07-29T23:59:07Z

Specifications and Detailed Instructions

← Older revision		Revision as of 23:59, 29 July 2016
Line 37:		Line 37:
	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	<!--[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />-->		<!--[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />-->
	~~[[File:RTFM.PNG\|50px\|link=http://http://www.manualslib.com/manual/578572/Steel-City-20520.html]]Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/product-manuals/20530.pdf]]URL to product user manual<br />
	[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/product-manuals/20530.pdf]]~~Model 20530 (current model)~~<br />
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	<!--[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use-->		<!--[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use-->

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

Elliott at 22:21, 13 August 2015

2015-08-13T22:21:20Z

← Older revision		Revision as of 22:21, 13 August 2015
Line 37:		Line 37:
	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	<!--[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />-->		<!--[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />-->
	[[File:RTFM.PNG\|50px\|link=http://~~http://www.manualslib~~.com/~~manual~~/~~578572~~/~~Steel-City-20520~~.~~html]]Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/wysiwyg/20520_17in_DRILL_PRESS_8.5.10_smallpdf.com_.pdf]]URL to product user manual<br />
	~~[[File:RTFM~~.~~PNG\|50px\|link=http://steelcitytoolworks~~.~~com/media/product-manuals/20530~~.pdf]]~~Model 20530 (current model)~~<br />
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	<!--[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use-->		<!--[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use-->

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

Emptyset: /* About */

2014-07-12T18:54:26Z

About

← Older revision		Revision as of 18:54, 12 July 2014
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 36:		Line 36:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

Emptyset: /* Owner(s) */

2014-07-12T18:54:12Z

Owner(s)

← Older revision		Revision as of 18:54, 12 July 2014
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 8:		Line 8:
	What is this equipment used for. Brief description.		What is this equipment used for. Brief description.

	[[File:Example.jpg\|thumbnail]]		[[File:Example.jpg\|thumbnail]]= Owner(s) =

	= Owner(s) =
	* Freeside		* Freeside
	* Donald Mead		* Donald Mead
Line 36:		Line 34:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

AUGuru at 17:00, 14 July 2013

2013-07-14T17:00:54Z

← Older revision		Revision as of 17:00, 14 July 2013
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 7:		Line 7:
	= About =		= About =
	What is this equipment used for. Brief description.		What is this equipment used for. Brief description.

	~~[[File:Example.jpg\|thumbnail]]~~

	= Owner(s) =		= Owner(s) =
	* Freeside		* Freeside
	* Donald Mead

	= Hackability =		= Hackability =
Line 36:		Line 33:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

AUGuru: /* Warnings */

2013-07-13T04:40:09Z

Warnings

← Older revision		Revision as of 04:40, 13 July 2013
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 7:		Line 7:
	= About =		= About =
	What is this equipment used for. Brief description.		What is this equipment used for. Brief description.

	~~[[File:Example.jpg\|thumbnail]]~~

	= Owner(s) =		= Owner(s) =
	* Freeside		* Freeside
	* ~~Donald Mead~~		* Member Name (Link to their Wiki Page if it exists)

	= Hackability =		= Hackability =
	Do Not Hack		Hack/Do Not Hack/List Of Desired Improvements

	== Permissions ==		== Permissions ==
Line 36:		Line 34:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =

AUGuru: /* Safety */

2013-07-13T04:39:09Z

Safety

← Older revision		Revision as of 04:39, 13 July 2013
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 7:		Line 7:
	= About =		= About =
	What is this equipment used for. Brief description.		What is this equipment used for. Brief description.

	~~[[File:Example.jpg\|thumbnail]]~~

	= Owner(s) =		= Owner(s) =
	* Freeside		* Freeside
	* ~~Donald Mead~~		* Member Name (Link to their Wiki Page if it exists)

	= Hackability =		= Hackability =
	Do Not Hack		Hack/Do Not Hack/List Of Desired Improvements

	== Permissions ==		== Permissions ==
Line 36:		Line 34:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =
Line 52:		Line 43:

	= Warnings =		= Warnings =
			Delete those that do not apply<br />

			[[File:Laser.PNG\|100px]] Eyesight Damage Risk

			[[File:Entrapment.png\|100px]] Entrapment Risk

			[[File:Flammable.png\|100px]] Flammable Risk

	[[File:HighSpeedMovingParts.png\|100px]] High Speed Moving Parts		[[File:HighSpeedMovingParts.png\|100px]] High Speed Moving Parts

			[[File:NonIoizingRadiation.png\|100px]] Non-Ionizing Radiation (RF)

			[[File:UV.png \|100px]] UV Radiation

			[[File:Radiation.PNG \|100px]] Radiation Warning

			[[File:Poison.PNG\|100px]] Poisonous Substances

			[[File:Hot.gif\|100px]] Hot Surfaces

	[[File:Cutting.PNG\|100px]] Cutting Risk		[[File:Cutting.PNG\|100px]] Cutting Risk

	[[File:Crush.png\|100px]] Crush and Pinch Risk		[[File:Crush.png\|100px]] Crush and Pinch Risk

			[[File:ElectricShock.PNG\|100px]] Electric Shock Risk

			[[File:ElectricShock.PNG\|100px]] High Voltage

	== Safety ==		== Safety ==

AUGuru at 04:37, 13 July 2013

2013-07-13T04:37:43Z

← Older revision		Revision as of 04:37, 13 July 2013
Line 1:		Line 1:
	[[File:ImageOfEquipment.jpg\|thumb\|300px]]		[[File:ImageOfEquipment.jpg\|thumb\|300px]]
	~~A drill press (also known as a pedestal drill~~, ~~pillar drill, or bench drill) is~~ a ~~fixed style of drill that may be mounted on a stand or bolted to the floor or workbench. Portable models with a magnetic base grip the steel workpieces they drill. A drill press consists of a base~~, ~~column (or pillar), table, spindle (or quill)~~, and ~~drill head, usually driven by an induction motor~~. The ~~head has a set of handles (usually 3) radiating from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis~~ of ~~the column. The table can~~ be ~~adjusted vertically and is generally moved by a rack and pinion; however, some older models rely on~~ the ~~operator to lift and reclamp the table in position~~. ~~The table may also be offset from the spindle's axis and in some cases rotated to a position perpendicular~~ to ~~the column~~. ~~The size of a drill press is typically measured in terms of swing. Swing is defined as twice the throat distance, which is the distance from the center of the spindle~~ to ~~the closest edge of the pillar.~~		To use this template, copy <code><nowiki>{{subst:EquipmentPage}}</nowiki></code> into a new page, save, and then begin editing. The current version of this template will be copied into the new page. Future modifications to this template will change existing pages. <br />
			Add or link new equipment pages to [[Equipment]]
	= Zone =		= Zone =
	[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]		[[Equipment]] \ [[Warehouse]] \ [[Woodshop]]
Line 7:		Line 7:
	= About =		= About =
	What is this equipment used for. Brief description.		What is this equipment used for. Brief description.

	~~[[File:Example.jpg\|thumbnail]]~~

	= Owner(s) =		= Owner(s) =
	* Freeside		* Freeside
	* ~~Donald Mead~~		* Member Name (Link to their Wiki Page if it exists)

	= Hackability =		= Hackability =
	Do Not Hack		Hack/Do Not Hack/List Of Desired Improvements

	== Permissions ==		== Permissions ==
Line 36:		Line 34:

	== Specifications and Detailed Instructions ==		== Specifications and Detailed Instructions ==
	~~<!--~~[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br /~~>--~~>		[[File:Info.jpg\|50px\|link=]]URL to product page if it exists<br />
	[[File:RTFM.PNG\|50px\|link=~~http://http://www.manualslib.com/manual/578572/Steel-City-20520.html~~]]~~Model 20520 (current model)<br />~~		[[File:RTFM.PNG\|50px\|link=]]URL to product manuals<br />
	~~[[File:RTFM.PNG\|50px\|link=http://steelcitytoolworks.com/media/~~product-manuals~~/20530.pdf]]Model 20530 (current model)~~<br />		[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use
	~~http://www.manualslib.com/manual/578572/Steel-City-20520.html?page=36#manual~~

	~~<!--~~[[File:Video.jpg\|50px\|link=]]Link to videos showing good examples of use~~-->~~

	~~Ours is a model 20520~~

	~~This model is not currently listed on the Steel City website, but a model 20530 is listed.~~

	= Tips =		= Tips =
Line 52:		Line 43:

	= Warnings =		= Warnings =
			Delete those that do not apply<br />

			[[File:Laser.PNG\|100px]] Eyesight Damage Risk

			[[File:Entrapment.png\|100px]] Entrapment Risk

			[[File:Flammable.png\|100px]] Flammable Risk

	[[File:HighSpeedMovingParts.png\|100px]] High Speed Moving Parts		[[File:HighSpeedMovingParts.png\|100px]] High Speed Moving Parts

			[[File:NonIoizingRadiation.png\|100px]] Non-Ionizing Radiation (RF)

			[[File:UV.png \|100px]] UV Radiation

			[[File:Radiation.PNG \|100px]] Radiation Warning

			[[File:Poison.PNG\|100px]] Poisonous Substances

			[[File:Hot.gif\|100px]] Hot Surfaces

	[[File:Cutting.PNG\|100px]] Cutting Risk		[[File:Cutting.PNG\|100px]] Cutting Risk

	[[File:Crush.png\|100px]] Crush and Pinch Risk		[[File:Crush.png\|100px]] Crush and Pinch Risk

			[[File:ElectricShock.PNG\|100px]] Electric Shock Risk

			[[File:ElectricShock.PNG\|100px]] High Voltage

	== Safety ==		== Safety ==
			Delete those that do not apply<br />

			[[File:BreathingMask.PNG\|100px]] Breathing Mask Required

			[[File:Gloves.PNG\|100px]] Gloves Required

	[[File:Goggles.PNG\|100px]] Eye Protection Required		[[File:Goggles.PNG\|100px]] Eye Protection Required

			[[File:HardHat.PNG\|100px]] Hardhat Required

			[[File:Hearing.PNG\|100px]] Hearing Protection Required

			[[File:Lockout.PNG\|100px]] Lockout Required

	[[File:RTFM.PNG\|100px]] Read the Fine Manual		[[File:RTFM.PNG\|100px]] Read the Fine Manual

	[[File:Unplug.PNG \|100px]] Unplug After Use		[[File:Unplug.PNG \|100px]] Unplug After Use

			[[File:WashHands.PNG\|100px]] Wash Hands Prior/After Use

			[[File:Unplug.PNG \|100px]] Unplug After Use

			[[File:WeldingMask.PNG \|100px]] Welding Mask Must Be Worn

	[[category: Equipment]]		[[category: Equipment]]
	[[category: ~~Details~~ Needed]]		[[category: QR Code Needed]]