LulzBot TAZ 3

From Freeside Atlanta
Revision as of 22:00, 22 January 2022 by HanDao (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

LulzBot TAZ 3's status is inoperable, pending firmware update.

  • Motherboard: Rambo 1.2d ATMEGA 2560
  • Likely LulzBot TAZ Dual Extruder Tool Head v2
    • Both fans on the dual extruder are controlled by the same wire.