Difference between revisions of "Infinity Portal"
(Created page with "The Infinity Portal is an interactive art project build for [http://alchemyburn.com/ Alchemy]. The concept of the project centers on an infinity mirror, which is an optical e...") |
|||
| Line 5: | Line 5: | ||
The idea for this project is to create a large archway that appears to be a freestanding gateway standing on an altar. People walk up to the gate, triggering a proximity sensor. Once the system detects that a user is present, the LED strips inside the infinity mirror are triggered, giving the appearance of a portal having opened in the gate and extending backwards infinitely. | The idea for this project is to create a large archway that appears to be a freestanding gateway standing on an altar. People walk up to the gate, triggering a proximity sensor. Once the system detects that a user is present, the LED strips inside the infinity mirror are triggered, giving the appearance of a portal having opened in the gate and extending backwards infinitely. | ||
== Step 1: Prototyping the concept == | |||
<gallery> | <gallery> | ||
File:InfinityBuild1Pic1.jpg|The mirror side of the prototype enclosure | File:InfinityBuild1Pic1.jpg|The mirror side of the prototype enclosure | ||
| Line 20: | Line 20: | ||
We had some good finds from the initial prototyping, and found that we can change the apparent depth of the tunnel by changing the brightness of the LEDs or spacing the two mirrors farther apart. We can make the tunnel appear to curve around by tilting the mirrors slightly. By using two of the two-way mirrors, we found that we could project into the back of the enclosure to make a projected image repeat indefinitely. | We had some good finds from the initial prototyping, and found that we can change the apparent depth of the tunnel by changing the brightness of the LEDs or spacing the two mirrors farther apart. We can make the tunnel appear to curve around by tilting the mirrors slightly. By using two of the two-way mirrors, we found that we could project into the back of the enclosure to make a projected image repeat indefinitely. | ||
== Step 2: Prototyping the design == | |||
<gallery> | <gallery> | ||
File:InfinityBuild2Pic1.jpg|Tam's concept sketch | File:InfinityBuild2Pic1.jpg|Tam's concept sketch | ||
Revision as of 05:20, 5 August 2013
The Infinity Portal is an interactive art project build for Alchemy.
The concept of the project centers on an infinity mirror, which is an optical effect created by placing a two-way mirror in front of a regular mirror. Any light source between the two mirrors appears to be reflected forever because only some of the light escapes the two-way mirror. The rest is reflected back, so the viewer's eyes sample the internal reflections in the mirror.
The idea for this project is to create a large archway that appears to be a freestanding gateway standing on an altar. People walk up to the gate, triggering a proximity sensor. Once the system detects that a user is present, the LED strips inside the infinity mirror are triggered, giving the appearance of a portal having opened in the gate and extending backwards infinitely.
Step 1: Prototyping the concept
The mirror side of the prototype enclosure
Laying the strips in the prototype enclosure
Testing the LED setup
Nathan peers into the wormhole
A portal in the table
The first round of prototyping involved testing the concept, so we built an Infinity Mirror from parts around the shop, a hardware store run, an LED strip, and some mirror tint ordered online.
We posted a write-up of the build on our blog, which was then featured on Hack A Day.
We had some good finds from the initial prototyping, and found that we can change the apparent depth of the tunnel by changing the brightness of the LEDs or spacing the two mirrors farther apart. We can make the tunnel appear to curve around by tilting the mirrors slightly. By using two of the two-way mirrors, we found that we could project into the back of the enclosure to make a projected image repeat indefinitely.
Step 2: Prototyping the design
Tam's concept sketch
The vector model in CamBam
The CamBam model with cutting paths set
Front view of the design prototype
Side view of the design prototype
Next, we built a prototype that Tam sketched as a conceptual rendering of the final model. To do this, we vector-mapped her sketch, processed it in CamBam, exported the gcode to the laser cutter and cut a prototype out of wood.
We used the two prototypes that we had (conceptual and design) at the Alchemy Art Fundraiser and received the highest funding at that event. We've still got some fundraising to do, but it looks like people are really excited about this concept!