Difference between revisions of "Phone"

From Freeside Atlanta
Jump to navigation Jump to search
m
Line 1: Line 1:
Currently the phone system accepts incoming calls and With a delay can make calls and some help [Equipment/Cisco_7960 Cisco 7960] see Eldon or Matt for howto <br>
Currently the phone system accepts incoming calls and With a delay can make calls and some help [[Equipment/Cisco_7960 | Cisco 7960]] see Eldon or Matt for howto <br>
The system doen't have a Voicemail set at this time!! <br>
The system doen't have a Voicemail set at this time!! <br>


Revision as of 05:37, 30 March 2015

Currently the phone system accepts incoming calls and With a delay can make calls and some help Cisco 7960 see Eldon or Matt for howto
The system doen't have a Voicemail set at this time!!

Phone System

To-Do

  • Get Callcentric DID (or Other)
  • Edit Sip.conf and Extension.conf With Callcentric login and a Google account
  • Test (DTMF TONES, calling, Dialplan, other)
  • Change Voicemail Settings (send wav to someone)
  • Add sendmail
  • Add A Custom Voicemail Greating
  • Add/Change Phone book (xml) (started )
  • Fix asterisk Config errors (some syntax changes needed in some files due to update)
  • Fix Cisco config
  • Make a web page for the phone system
  • ADD URL (sip calling) calling into asterisk (Guide)
  • Change some init
  • Fix some internal port FWDing
  • Debug 7960
  • Mount Phones
  • Buy a 48v 1.5 amp Power brick
  • Make POE crossover adapters (4,5 switches with 7,8)
  • Make Instructions for 7960 (see talk)
  • Make NOTICE for phone

Prerequisites

Supplies

  • Sip Phone (cisco sip)
  • Debian Server
  • Callcentric DID
  • Google Voice account
  • Python 2.7 w/ setuptools and simplejson
  • pygooglevoice script
  • tftp (phone config)
  • apache2 (host directory and logo)

What was installed

  • python-setuptools
  • pygooglevoice script
  • tftp
  • apache2
  • asterisk 13

Installing Pygooglevoice

  • We Ran the below code at root mainly to insure the install of pygooglevoice-0.5.tar.gz
wget http://pygooglevoice.googlecode.com/files/pygooglevoice-0.5.tar.gz
tar zxvf pygooglevoice-0.5.tar.gz
cd pygooglevoice-0.5
python setup.py install
sed -i 's|https://www.google.com/accounts/ServiceLoginAuth?service=grandcentral%7Chttps://accounts.google.com/ServiceLogin?service=grandcentral\&continue=https://www.google.com/voice%7C' /usr/local/lib/python2.7/dist-packages/googlevoice/settings.py

sed -i 's| galx.*| galx = re.search(r\"name=\\"GALX\\" type=\\"hidden\\"\\ 

*value=\\"(.+)\\"\", content).group(1)|' /usr/local/lib/python2.7/dist-packages/googlevoice/voice.py
  • Latter We installed asterisk 13 from source and Apache+php using the Package manager as well as the tftp server we decided on using.

Main Files

TFTP

The Main files here are:

  • dialplan.xml = dialplan on Phone ONLY
  • P0S3-08-12-00.load = Phone Firmware
  • XMLDefault.cnf.xml = All Cisco Phone config
  • SIP(MAC_HERE).CNF = Phone config
  • SipDEFAULT.CNF = All Cisco SIP Phones config
  • *.PCM and *.RAW are ringtones (config-ed in RINGLIST.DAT)

HTTP

  • NOTE: HTTP on cisco requires port usage in urls it will not assume port 80
  • The Directory is located here! and the directory is a simple XML file (freeside.php with xml headers) ever there is a limit of 32 entries be warned If we need more we will need to use a database and fetch from there using a different script
  • the Phone logo I also here

Asterisk Setup

We edited sip.conf and extensions.conf to our info. Adding a password to the phone and the correct Callcentric and Google info. Note: after editing the documents you must restart asterisk. After the asterisk server was up we set up the TFTP server with the config files for the phone and the ringtones.. the config file had to be added to to include the network IP of the TFTP server, the web-server and asterisk install and the creds. we gave this user in sip.conf

Files

Sip.conf
[general]
context=phone                 ; Default context for incoming calls
allowoverlap=no                 ; Disable overlap dialing support. (Default is yes)
bindport=5060                  ; UDP Port to bind to (SIP standard port is 5060)
externrefresh=60
localnet=192.168.1.0/255.255.255.0
udpbindaddr=0.0.0.0             ; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
canreinvite=no
dtmfmode = rfc2833
tcpenable=no
;directmedia=yes
register => sipusername:sippassword@iptel.org:5060/253xxxxxxx
session-timers=refuse
disallow=all
allow=ulaw
allow=gsm
 
[201]
defaultuser=201
secret=secret1
type=peer
callerid="user1 "
host=dynamic
context=phone
outgoinglimit=1
incominglimit=1
canreinvite=no
nat=yes
qualify=yes

[202]
defaultuser=202
secret=secret2
type=peer
callerid="user2 "
host=dynamic
context=phone
outgoinglimit=1
incominglimit=1
canreinvite=no
nat=yes
qualify=yes

[203]
defaultuser=203
secret=secret3
type=peer
callerid="user3 "
host=dynamic
context=phone
outgoinglimit=1
incominglimit=1
canreinvite=no
nat=yes
qualify=yes
 
[DID]
context=sip
defaultuser=sipusername
type=peer
secret=sippassword
host=iptel.org
fromdomain=iptel.org
fromuser=253xxxxxxx
trustrpid = yes
sendrpid = yes
canreinvite = no
insecure=port,invite
nat=yes
extensions.conf
[general]
static=no
writeprotect=no
autofallthrough=yes
clearglobalvars=yes
priorityjumping=no

[globals]
gtimeout=50    ; timeout value
; initialize
gvuser=10000
 
[sip]
exten => _253xxxxxxx,1,ExecIf($[${gvuser}!=10000]?Bridge(${gvuser}):Dial(SIP/201&SIP/203,60,D(:1)))
exten => _253xxxxxxx,n, Set(GLOBAL(gvuser)=10000)
exten => _253xxxxxxx, n, Hangup()
[phone]
include => sip
include => gv-outbound
[gv-outbound]
exten => _NXXNXXXXXX,1,GoTo(1${EXTEN},1)
exten => _1NXXNXXXXXX,1,Answer
exten => _1NXXNXXXXXX,n,Set(GLOBAL(gvuser)=${CHANNEL})
exten => _1NXXNXXXXXX,n,System(gvoice -e gvusername@gmail.com -p gvpassword call ${EXTEN} 1253xxxxxxx 1 &)
exten => _1NXXNXXXXXX,n,Ringing
exten => _1NXXNXXXXXX,n,Wait(30)
exten => _X.,n,Noop(Never received callback from Google Voice on channel ${gvuser} . exiting)
exten => h,1,GotoIf($["${CHANNEL(state)}" = "Ring"]?:bridged)
exten => h,n,Noop(Hangup on channel ${gvuser})
exten => h,n,System(gvoice -e gvusername@gmail.com -p gvpassword cancel &)
exten => h,n, Set(GLOBAL(gvuser)=10000)
exten => h,n,Hangup()
exten => h,n(bridged),Noop(The channel has been bridged successfully)
exten => h,n, Set(GLOBAL(gvuser)=10000)

Test cmds

 gvoice -e [gvusername@gmail.com] -p [gvpassword] call NXXNXXXXXX [callcentricdid] 1
  • the above makes a call
asterisk -rvvvvv
  • (loads the asterisk server Diagnostic program, type help for list of cmds) some are: sip show peers sip show registry sip show users sip reload

Links

Cisco 79XX Phone

Phone setup
How to use the 7060g
Directory info
cisco 79xx info

Asterisk 13 Documentation

Asterisk 13 Documentation
Application Dial


Other

Asterisk™: The Future of Telephony

how to on freepbx
Headset Jack Pinout << Make a Intercom anyone?

Retrieved from "https://wiki.freesideatlanta.org/index.php?title=Phone&oldid=2231"