Difference between revisions of "Custom Door Audio"
Jump to navigation
Jump to search
(Instructions to set up audio file for member's RFID card at front door) |
(Instructions to set up audio file for member's RFID card at front door) |
(No difference)
| |
Latest revision as of 20:18, 5 March 2018
Freeside can make it so that when a member's RFID fob or card is read by the RFID reader at the front door, a specific audio file will be played.
To set this up for a member,
- [ ] Get a five- to ten-second audio file.
- [ ] Convert it to wav format if necessary
- [ ] Name it XXXX.wav, where XXXX is the number of the RFID card or fob issued to the member.
- [ ] Upload it to the Raspberry Pi.
- [ ] local>scp /local/path/xxxx.wav USER@10.1.50.10:/tmp where USER is a user ID valid on the Raspberry Pi
- [ ] Place it in the correct folder.
- [ ] local>ssh USER@10.1.50.10
password for USER:~~~~~~~~~
- [ ] pi>sudo cp /tmp/XXXX.wav /usr/local/bin/FreesideDoorMon/DoorAudio/wav
password for USER:~~~~~~~~~
- [ ] pi>exit
- [ ] local>exit