Busy Bee Lathe
- Freeside Atlanta
- (Possibly others; ask Directors for more information)
In this optional section, specify the conditions for permission to use the machine, if any.
- Do not run lathe if oil level below 'low' on sightglass. add pic
- Test emergency foot brake before use
- NEVER EVER EVER attempt to change spindle speeds while machine is running
need labeled picture of headstock and apron controls
Setting Spindle Speed
add table See also: Speeds and Feeds
controls specs, lube type, does the lube pump even work?
put up edited CT042 schematic here
Instruction and Safety Articles
Single point threading drive and apron controls need to be refurbished and (re)installed.