Difference between revisions of "Laser Cutter"
Briancribbs (talk | contribs) |
Briancribbs (talk | contribs) |
||
| Line 19: | Line 19: | ||
The laser uses an RF excited CO2 gas laser producing an invisible to the human eye beam at 1090um. Almost everything is opaque to this wavelength and as such if it can sublimate the material it will. This means that if you put *anything* in the path of the laser it'll try to cut it. If it can't cut the material and it doesn't reflect the beam it *WILL* heat it up very very rapidly. The excited gas you can visually see in the tube is kind of the same thing you see in neon signs. 25KV is applied and the gas is excited to the point where it has to release extra electrons and you see this as light. Do not forget that the beam coming out of the tube is completely invisible and completely dangerous. | The laser uses an RF excited CO2 gas laser producing an invisible to the human eye beam at 1090um. Almost everything is opaque to this wavelength and as such if it can sublimate the material it will. This means that if you put *anything* in the path of the laser it'll try to cut it. If it can't cut the material and it doesn't reflect the beam it *WILL* heat it up very very rapidly. The excited gas you can visually see in the tube is kind of the same thing you see in neon signs. 25KV is applied and the gas is excited to the point where it has to release extra electrons and you see this as light. Do not forget that the beam coming out of the tube is completely invisible and completely dangerous. | ||
[[ | In this picture from left to right you can see: | ||
# 24VDC power supply | |||
# 12VDC power supply | |||
# In the back are 3 Keling stepper drivers | |||
# In front of those are 2 120VAC solid state relays (not wired and currently not present in the enclosure) | |||
# Breakout board | |||
# Power entry | |||
# Hole for 120VAC duplex outlet | |||
[[File:laserStuff1.jpg|thumb|600px]] | |||
[[ | In this picture you can see the high voltage power supply | ||
[[File:laserStuff2.jpg|thumb|600px]] | |||
Revision as of 00:24, 12 May 2013
The laser cutter is a CNC(Computer Numeric Control) machine capable of the following:
- Cutting
* paper * cardboard * plastics up to 1/2" depending on type * craft foam * plywood of certain thicknesses depending on number of layers as well as what type of bonding glue was used * other stuff I haven't yet tried
- Engraving (raster and vector)
* cardboard * plastic * wood * glass * dark stone
Contrary to popular belief lasers don't melt things. They remove material via a process called sublimation; turning an object from the solid state directly to the gaseous state skipping the liquid stage almost completely.
The laser uses an RF excited CO2 gas laser producing an invisible to the human eye beam at 1090um. Almost everything is opaque to this wavelength and as such if it can sublimate the material it will. This means that if you put *anything* in the path of the laser it'll try to cut it. If it can't cut the material and it doesn't reflect the beam it *WILL* heat it up very very rapidly. The excited gas you can visually see in the tube is kind of the same thing you see in neon signs. 25KV is applied and the gas is excited to the point where it has to release extra electrons and you see this as light. Do not forget that the beam coming out of the tube is completely invisible and completely dangerous.
In this picture from left to right you can see:
- 24VDC power supply
- 12VDC power supply
- In the back are 3 Keling stepper drivers
- In front of those are 2 120VAC solid state relays (not wired and currently not present in the enclosure)
- Breakout board
- Power entry
- Hole for 120VAC duplex outlet
In this picture you can see the high voltage power supply
