Difference between revisions of "Laser Library"
Jump to navigation
Jump to search
m |
|||
| Line 20: | Line 20: | ||
Feedrate: 200 mm/min | Feedrate: 200 mm/min | ||
== Foam == | |||
Foams have a much higher tendency to melt and warp from the heat byproduct of the laser, so a higher power setting and faster feedrate is ideal to produce clean cuts all the way through the material. | |||
=== 1 mm / 0.4" craft foam === | |||
Power: ? | |||
Feedrate: ? | |||
=== 6 mm / 0.23" EVA foam === | |||
Power: 5.0 | |||
Feedrate: 600 mm/min | |||
Revision as of 20:23, 8 September 2014
Acrylic
3 mm / 0.11" clear
Power: ?
Feedrate: ?
3 mm / 0.11" opaque
Power: 3.0
Feedrate: 70 mm/min
Cardboard
3 mm / 0.11" corrugated
Power: 1.0
Feedrate: 200 mm/min
Foam
Foams have a much higher tendency to melt and warp from the heat byproduct of the laser, so a higher power setting and faster feedrate is ideal to produce clean cuts all the way through the material.
1 mm / 0.4" craft foam
Power: ?
Feedrate: ?
6 mm / 0.23" EVA foam
Power: 5.0
Feedrate: 600 mm/min