Difference between revisions of "Ryobi 9" Band Saw BS903"
Benbradley (talk | contribs) (Created by Ben Bradley, Oct. 21, 2014) |
|||
| Line 1: | Line 1: | ||
[[File:ImageOfEquipment.jpg|thumb|300px]] | [[File:ImageOfEquipment.jpg|thumb|300px]] | ||
A bandsaw is a power tool which uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band usually rides on two wheels rotating in the same plane, although some bandsaws may have three or four wheels. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load.[1] Bandsaws are used for woodworking, metalworking, or for cutting a variety of other materials. They are particularly useful for cutting irregular or curved shapes, but can make straight cuts. The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf. | |||
= Zone = | = Zone = | ||
[[Woodshop]] | |||
= About = | = About = | ||
Small bandsaw with 9 inch throat and 3 1/2 inch vertical (resaw) capability, for making straight or curved cuts in smaller pieces of wood. | |||
= Owner(s) = | = Owner(s) = | ||
Ben Bradley | |||
= Hackability = | = Hackability = | ||
The basic structure is not hackable, but: | The basic structure is not hackable, but: | ||
* The blade is easily changeable/replaceable. | * The blade is easily changeable/replaceable. | ||
* The blade guides | * The blade guides can be adjusted. The Fine Manual presumably has details. | ||
== Permissions == | == Permissions == | ||
For general use with minnimal knowledge of woodworking equipment and practices. Treat this equipment as if it were your own, cleaning items off of the top of the machine and around its table after usage. | For general use with minnimal knowledge of woodworking equipment and practices. Treat this equipment as if it were your own, cleaning items off of the top of the machine and around its table after usage. | ||
== Restrictions == | == Restrictions == | ||
Do not use for metal cutting. There is at least one bandsaw in the shop for metal cutting. Wood and plastic are acceptable materials. | Do not use for metal cutting. There is at least one bandsaw in the shop for metal cutting. Wood and plastic are acceptable materials. | ||
== Caution == | == Caution == | ||
This tool is very effective at cutting fingers. Use standard woodworking safety equipment such as goggles and saw workpiece "pusher" tools | This tool is very effective at cutting fingers. Use standard woodworking safety equipment such as goggles and saw workpiece "pusher" tools | ||
= Basic Instructions = | = Basic Instructions = | ||
* Connect and turn on dust collector if a significant amount of sawing (such as resawing) will be done. | * Connect and turn on dust collector if a significant amount of sawing (such as resawing) will be done. | ||
| Line 26: | Line 29: | ||
* Turn off saw power. | * Turn off saw power. | ||
== Specifications and Detailed Instructions == | == Specifications and Detailed Instructions == | ||
* 9 inch throat (frame to blade) capacity | |||
* 3 1/2 inch cutting thickness (resaw) capacity (barely enough to resaw a standard 2x4) | |||
* Table size with extension 11 3/4 x 14 3/4 inches | |||
* Blade width 1/8" to 3/8" | |||
* Blade length 59 1/4 to 59 1/2 inches | |||
Full user manual in three languages | |||
http://manuals.ryobitools.com/system/files/304/original/BS903_979_trillingual.pdf?2011 | |||
Exploded view: | |||
http://www.ereplacementparts.com/ryobi-bs903-band-saw-parts-c-7931_7949_7953.html | |||
= Tips = | = Tips = | ||
* | * Band Saw Handbook by Mark Douginske http://www.amazon.com/Band-Saw-Handbook-Mark-Duginske/dp/0806963980/ | ||
= Warnings = | = Warnings = | ||
[[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts | [[File:HighSpeedMovingParts.png|100px]] High Speed Moving Parts | ||
[[File:Cutting.PNG|100px]] Cutting Risk | [[File:Cutting.PNG|100px]] Cutting Risk | ||
== Safety == | == Safety == | ||
[[File:Goggles.PNG|100px]] Eye Protection Required | [[File:Goggles.PNG|100px]] Eye Protection Required | ||
[[File:RTFM.PNG|100px]] Read the Fine Manual | [[File:RTFM.PNG|100px]] Read the Fine Manual | ||
[[category: Equipment]] | [[category: Equipment]] | ||
[[category: QR Code Needed]] | [[category: QR Code Needed]] | ||
Latest revision as of 22:29, 13 August 2015
A bandsaw is a power tool which uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces. The band usually rides on two wheels rotating in the same plane, although some bandsaws may have three or four wheels. Bandsawing produces uniform cutting action as a result of an evenly distributed tooth load.[1] Bandsaws are used for woodworking, metalworking, or for cutting a variety of other materials. They are particularly useful for cutting irregular or curved shapes, but can make straight cuts. The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf.
Zone
About
Small bandsaw with 9 inch throat and 3 1/2 inch vertical (resaw) capability, for making straight or curved cuts in smaller pieces of wood.
Owner(s)
Ben Bradley
Hackability
The basic structure is not hackable, but:
- The blade is easily changeable/replaceable.
- The blade guides can be adjusted. The Fine Manual presumably has details.
Permissions
For general use with minnimal knowledge of woodworking equipment and practices. Treat this equipment as if it were your own, cleaning items off of the top of the machine and around its table after usage.
Restrictions
Do not use for metal cutting. There is at least one bandsaw in the shop for metal cutting. Wood and plastic are acceptable materials.
Caution
This tool is very effective at cutting fingers. Use standard woodworking safety equipment such as goggles and saw workpiece "pusher" tools
Basic Instructions
- Connect and turn on dust collector if a significant amount of sawing (such as resawing) will be done.
- Turn on saw power and light power.
- Make cuts.
- Turn off saw power.
Specifications and Detailed Instructions
- 9 inch throat (frame to blade) capacity
- 3 1/2 inch cutting thickness (resaw) capacity (barely enough to resaw a standard 2x4)
- Table size with extension 11 3/4 x 14 3/4 inches
- Blade width 1/8" to 3/8"
- Blade length 59 1/4 to 59 1/2 inches
Full user manual in three languages http://manuals.ryobitools.com/system/files/304/original/BS903_979_trillingual.pdf?2011
Exploded view: http://www.ereplacementparts.com/ryobi-bs903-band-saw-parts-c-7931_7949_7953.html
Tips
- Band Saw Handbook by Mark Douginske http://www.amazon.com/Band-Saw-Handbook-Mark-Duginske/dp/0806963980/
Warnings
High Speed Moving Parts
Cutting Risk
Safety
Eye Protection Required
Read the Fine Manual